Pre-Crushers: Ideal for Waste Destruction

[vc_row][vc_column][vc_column_text]Pre-Crushers are available with a single 7” cylinder or twin 6” cylinders on models ranging from the 5260 to the 10660. Rubbish that tends to have memory is completely crushed before being pushed into the container, making our Pre-Crushers good solutions for waste destruction. A Pre-Crusher’s function can be by-passed when desired. The Pre-Crusher and the compactor can be programmed to run at different force settings.

The Pre-Crusher is available in a variety of configurations. Whether you need a free-standing unit with an open sided hopper or a total enclosure with a walk on/ drive on deck. Sebright Products can engineer a solution for you.

The Pre-Crusher is exclusively designed to be an integral part of the compactor, not an add-on or after thought. Pre-Crushers are ideal for pallets, drum crushing, waste destruction, and to achieve maximum density. They are built to take the abuses of high compaction forces.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

Long Motor Life – T.E.F.C. (Totally Enclosed Fan Cooled)
5″ solid steel wall – with 2” thick steel guide plates on each side
Stress designed support system all above the chamber eliminating material from wedging in the guide tracks
High Tech PLC driven control panel
Option to by-pass the Pre-Crusher
Extra heavy-duty frame and ram
AR floor and sides (Abrasive Resistant 235 Alloy)
Nylatron guide shoes; 3 shoes on each side
Capable of crushing at one force and compacting at a different force setting

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]Common Applications: